News Letter
Hot
Back to products
TriSolv 3685 PSA Paper – 11 mil Self-Adhesive Semi-Gloss
Original price was: $261.06.$245.75Current price is: $245.75.
UltiMaker S8 Industrial 3D Printer | Dual Extrusion FFF
$8,999.00
Available Additional $500 Trade-In Discount (with valid serial number). Contact Paragon Visual for details and an official quote.
The UltiMaker S8 is a next-generation industrial 3D printer designed for maximum speed, precision, and material versatility. Equipped with dual extrusion, a fully enclosed heated build chamber, and the advanced UltiMaker Cheetah motion planner, it delivers up to 4× faster prints without sacrificing quality. New high-flow print cores enable rapid production using a wide range of advanced materials, including carbon fiber composites. Ideal for professional prototyping, tooling, and end-use part manufacturing.
Description
UltiMaker S8 – Industrial 3D Printing at Full Speed
The UltiMaker S8 is built for high-speed, high-performance 3D printing. With dual extrusion, an enclosed build volume, and a new advanced motion system, the S8 delivers up to 4× faster printing with outstanding accuracy and layer consistency. Designed for industrial use, it integrates seamlessly into production workflows while offering the material freedom UltiMaker is known for. See our complete 3D printer selection here.
Key Features (Expanded):
- Blazing Speed with UltiMaker Cheetah: The S8 is powered by the revolutionary UltiMaker Cheetah motion planner—the world’s first jerk-limited motion planner for FFF printing. Unlike traditional acceleration systems, Cheetah uses third-order continuous motion with a corner blending algorithm to eliminate sudden directional changes. This results in smoother transitions, higher speeds (up to 500 mm/s), and reduced mechanical wear—all while preserving dimensional accuracy and surface quality.
- High-Flow Print Cores: The included AA+ and CC+ 0.4 mm print cores are newly optimized for high flow rates, capable of extruding up to 35 mm³/s. These cores are quick-swappable, minimizing downtime during maintenance or material changeovers. Combined with the improved dual-gripper feeder and motion system, these cores enable high-throughput printing without compromising detail or reliability—even with abrasive materials like carbon fiber composites.
- Dual Extrusion System: The dual-extrusion print head features a precision auto nozzle-lifting system, flood detection, and inductive probing for consistent layer alignment, clean transitions between materials, and reduced print failures.
- Industrial-Grade Repeatability: With over a decade of proven reliability in UltiMaker engineering, the S8 achieves a 95%+ print success rate, even with complex jobs and open material use.
- Supports Complex Geometries: Print intricate multi-material parts, support structures, and overhangs with unmatched speed and reliability—ideal for manufacturing, tooling, and advanced prototyping.
Applications:
- Functional Prototypes: Create high-precision models using a variety of materials.
- Production Tools: Print durable fixtures, jigs, and tooling aids with industrial-grade reliability.
- End-Use Parts: Use carbon fiber-reinforced and high-temp materials for real-world, usable components.
Technical Specifications:
| Specification | Details |
|---|---|
| Technology | Fused Filament Fabrication (FFF) |
| Build Volume | 13 × 9.4 × 11.8 in |
| Print Head | Dual-extrusion with auto nozzle lift, flood detection, and inductive probing |
| Nozzle Temperature | Up to 644 °F |
| Motion System | UltiMaker Cheetah planner with jerk-limited continuous motion |
| Build Plate | Flexible PEI, heated up to 248 °F |
| Enclosed Chamber Temp | Up to 122 °F (open-loop) |
| Layer Resolution | 60–300 microns |
| Filament Diameter | 2.85 mm |
| Compatible Print Cores | AA+ 0.4, CC+ 0.4, BB 0.4, DD 0.4 (optional) — In the box: (2) AA+ 0.4 mm print cores |
| Connectivity | Wi-Fi (2.4/5 GHz), LAN, USB |
| Display | Color touchscreen interface |
| System Processor | Quad-core ARM Cortex, 1.8 GHz |
| Camera | Full HD HDR monitoring camera |
| Printer Dimensions | 19.5 × 23 × 31.5 in (including spool holder) |
| Weight | 66 lb |
Compatible Materials:
- UltiMaker PLA, Tough PLA, PETG, TPU 95A
- UltiMaker ABS, CPE, CPE+, PC
- UltiMaker Nylon CF, PET-CF, and third-party composites
The UltiMaker S8 is built to accelerate your production—faster prints, smarter workflows, and ultimate flexibility for industrial applications.
Brand
Brand
UltiMaker 3D Printers & Materials
UltiMaker 3D Printers, Materials & Accessories
UltiMaker 3D printers deliver reliable, professional fused-filament fabrication for teams that need repeatable, high-quality parts without babysitting the machine. At Paragon Visual, we focus on the UltiMaker platform because it gives engineers, manufacturers, and educators a secure, easy-to-manage workflow – from CAD file to finished part – backed by proven hardware, smart software, and a deep materials ecosystem. Whether you are evaluating your first UltiMaker system or expanding an existing fleet, this page brings together our curated selection of UltiMaker printers, print cores, and high-performance materials. Every UltiMaker system we sell is supported by our U.S.-based team, so you get help with configuration, profiles, and real-world printing questions long after the hardware arrives.Why Choose UltiMaker from Paragon Visual?
- Trusted UltiMaker partner: We work directly with UltiMaker to match printers, materials, and accessories to your applications and budget.
- Industrial and education expertise: From production environments to classrooms and labs, we help dial in the right UltiMaker 3D printers for your team.
- Real support in the United States: Talk with people who actually understand 3D printing, not a generic call center.
- End-to-end solutions: Pair UltiMaker hardware with installation, training, and ongoing supplies through our 3D Printers & Supplies category.
UltiMaker 3D Printing Solutions We Offer
- UltiMaker Factor 4: Industrial-grade printer for high-temperature composites, repeatable production parts, and validated processes.
- UltiMaker S-series printers: Flexible workhorses for design studios, engineering teams, and advanced education, including the S6, S7, and S8 platforms.
- Materials for real applications: UltiMaker PET CF, PPS CF, ABS, Nylon, and other engineered materials for fixtures, tooling, housings, and replacement parts.
- Print cores and accessories: High-flow AA and CC print cores, HT print cores for Factor 4, flexible build plates, and other accessories that keep your printers running.
Applications & Industries
- Manufacturing and industrial: Jigs, fixtures, end-of-arm tooling, brackets, and custom housings that stand up to real use on the shop floor.
- Defense and aerospace: Secure, repeatable UltiMaker 3D printers that support maintenance, repair, and lightweight components in regulated environments.
- Education and research: Reliable printers for engineering programs, CTE classrooms, and university labs that need uptime and consistent results.
- Product development: Fast, accurate prototypes that help your team test fit, function, and ergonomics before committing to tooling.
Explore UltiMaker Resources
- Learn about our UltiMaker partnership: Read our overview of UltiMaker and MakerBot solutions on the Paragon Visual blog.
- See the UltiMaker hardware platform: Explore official UltiMaker systems, materials, and software on the UltiMaker website.
UltiMaker 3D printers from Paragon Visual give you a secure, supported path into professional additive manufacturing – from your first prototype to full production.
Specs
Specs
Dimensions
Build volume
330 x 240 x 300 mm (13 x 9.4 x 11.8 inches)
Assembled dimensions
W 495 x D 500 x H 1190 mm (W 19.5 x D 19.7 x H 46.9 inches)
Print technology
Fused Deposition Modeling (FDM)
Compatible filament diameter
2.85 mm
Weight
41.9 kg (92.4 lbs)
Maximum power output
500 W
Printer properties
Layer resolution
0.25 mm nozzle: 150 - 60 micron 0.4 mm nozzle: 200 - 20 micron 0.6 mm nozzle: 300 - 20 micron 0.8 mm nozzle: 600 - 20 micron
XYZ resolution
6.9, 6.9, 2.5 micron
Feeder type
Dual-geared feeder, reinforced for composite materials
Display
4.7-inch (11.9 cm) color touchscreen
Print core replacement
Swappable print cores
Print head
Dual extrusion print head with an auto-nozzle lifting system, swappable print cores, and flood detection.
Nozzle diameters
0.25 mm, 0.4 mm, 0.6 mm, 0.8 mm
Operation parameters
Filter technology
Replaceable EPA filter
Air extraction rate
1 - 50 m³/h (35 m³/h nominal rate for most materials at 23 °C)
Nozzle temperature
180 - 280 °C
Nozzle heat-up time
< 2 minutes
Operating sound
< 51 dBA
Build plate leveling
Advanced active leveling with more accurate inductive sensors
Build plate
PEI-coated flexible steel build plate
Build plate heat-up time
< 5 minutes (from 20 to 60 °C)
Operating ambient temperature
15 - 32 °C (59 - 90 °F)
Non-operating temperature
0 - 32 °C (32 - 90 °F)
Ecosystem
Supplied free software
UltiMaker Cura – print preparation software UltiMaker Digital Factory – printer management software UltiMaker Essentials – enterprise-grade online software tools
Supported OS
MacOS, Windows, and Linux
Plugin integration
SolidWorks, Siemens NX, Autodesk Inventor
Supported file types
UltiMaker Cura: STL, OBJ, X3D, 3MF, BMP, GIF, JPG, PNG Printable formats: G, GCODE, GCODE.gz, UFP
File transfter
Wi-Fi (2.4 and 5 GHz), Ethernet, USB
Safety and compliance
Certification
CE, FCC, VPAT, RoHS, REACH, CB, BIS, KC, PSE, RCM, SRRC, MIC, NCC, Safe unattended professional use
More information
Learn more about UltiMaker S7 Pro Bundle safety and compliance.
You may also like…
UltiMaker S7 Pro Bundle
Original price was: $12,734.74.$11,500.00Current price is: $11,500.00.Related products
MakerBot Tough PLA Filament – 1kg Spool for Sketch Series
$39.00
Select options
This product has multiple variants. The options may be chosen on the product page
UltiMaker PET CF Filament – S Series
$139.00
Select options
This product has multiple variants. The options may be chosen on the product page
